Mitsubishi Galant Common Problems and Solutions
Gears slipping
Problem:
A known issue on the Galant is for the gears to slip. This is most common in reverse.
Solution:
You need to replace the rear housing and reverse clutch assembly to sort this problem. We can help you find any gearbox related parts at very low prices. Follow the link below to see:
Difficulty level
Ball joint failure
Problem:
If the ball joint has failed you will be hearing a knocking noise coming from the suspension when driving over speed bumps, or rough surfaces.
Solution:
Fitting a replacement ball joint will resolve the issue. We can help you find a replacement ball joint at a price you will be happy with.
Difficulty level
Ball Joint
Oil leak
Problem:
The usual cause of an oil leak on the Galant is the driveshaft seal. If you have noticed oil leaking onto the floor, this would be the first place to check. The leak will be coming from the back of the engine.
Solution:
Replacing the driveshaft seal should rectify the situation.
Difficulty level
Driveshaft
Engine management warning light
Problem:
If the engine management warning light has appeared on the dashboard, it is usually caused by an engine sensor. The usual faulty engine sensor on this car is the crankshaft position sensor.
Solution:
You will need to fit a replacement crankshaft position sensor to sort the problem.
Difficulty level
Crank Position Sensor
Lack of power/misfiring
Problem:
The throttle body can get clogged up on this car. If it does it can lead to a lack of power at higher speeds and unresponsive acceleration. You may also be noticing that the engine is misfiring. These are common symptoms of the throttle body being blocked.
Solution:
You will need to clean out the throttle body with some carb cleaner to resolve the issue. Watch this video below to see how this is done:
Difficulty level
Throttle Body
