Used BMW Inlet Manifold runner control module parts For Sale

Used BMW Inlet Manifold runner control modules

All used BMW Inlet Manifold runner control modules listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for BMW from premium breaker yards from across the UK.

About Inlet Manifold runner control modules

The engine needs oxygen from the air in order for combustion to work. It is imperative that the car's engine is supplied with the correct amount of clean, filtered air. Air needs to be as clean as possible before it mixes with the fuel and burns in the cylinders of the engine. The overall result of this ensures the engine is working to its optimum, providing more power and fuel efficiency.  A car's air intake system consists of several vital components that work together to ensure the air entering the engine is a steady and uninterrupted flow of clean, filtered air.  The BMW inlet manifold runner control module ensures the air or fuel/air mixture is provided to the inlet/intake ports in the cylinder heads in the engine. In some cases the inlet manifold runner control module also functions to deliver coolant to the engine.

The inlet manifold gasket functions to act as a sealant to the BMW inlet manifold, ensuring a tight seal is maintained between the inlet manifold and the cylinder head.  The inlet manifold, consists of a selection of pipes or tubes, often referred to as runners, usually manufactured from a specialised strong plastic, that function to deliver the air equally to each of the cylinder heads in the engine. The inlet manifold runner control module works to ensure the air is divided evenly, so an equal quantity of air is flowing into each of the cylinders at the same time, so that precisely the right amount of air can mix with precisely the right amount of fuel in the cylinders in order for combustion to occur. 

It is common for an internal combustion engine to use a four-stroke action.  The intake stroke, which is the first stroke of the pistons, draws an equal amount of air from the inlet manifold into each cylinder, delivering the air via the air intake valve. This process is managed by the BMW inlet manifold runner control module. For the next three strokes of the engine the air intake valves are shut while compression, combustion and exhaust processes are occurring. Then the intake valves open again and once more the air is drawn through into the cylinders from the inlet manifold. The BMW intake manifold runner control module ensures the right amount of air is ready to be drawn into the cylinders when the intake valves open and that the same amount of air is being delivered into each of the engine's cylinders. 

Signs of a faulty inlet manifold runner control module can include an engine that struggles when idling; a stuttering, shaking engine; an engine that is stalling; and a loss of power when accelerating. A malfunctioning inlet manifold runner control module will cause the Check Engine warning light to illuminate on the dashboard. To be certain the exact cause of the fault is properly diagnosed it's always a good idea to seek the advice of your mechanic. It is really important when replacing a faulty inlet manifold runner control unit that you fit a replacement part that's compatible with your vehicle. Specifically manufactured for the make and model of your vehicle, the BMW inlet manifold runner control module is the ideal product, providing a part that will fit well, perform properly and last longer.

BMW trivia

• The very first BMW was named the 'Dixi'. They hadn't designed it (it was really an English Austin), and they dropped the name 'Dixi' very quickly, instead opting for the rather more grandiose BMW 3/15 DA-2. Rolls off the tongue!
• One of the reasons older BMWs keep their value is because it's easy to get spare parts for even the oldest models. That's because BMW has carried on making car parts, even for cars that were built in WWII.
• The BMW M1 has a classic look, so it's no surprise that its designer also came up with some other amazing car designs. Giorgetto Giugiaro is also responsible for the DeLorean, the Beretta U22 Neos handgun, and the Nikon D4 camera! Although, he also designed the Yugo, commonly called the worst car that's ever been made.
• The main headquarters for BMW in Munich is designed and shaped to look like car parts. There was a whole new 'four-cylinder' building added on in 1973, and there's definitely the look of an engine about the architecture.
• The BMW company was founded way back in 1916 and originally manufactured engines for planes. High demand for plane engines during WWI was good news for BMW, but they carried on making plane engines right up until 1945.