Find parts for your car
Used Citroen Inlet Manifold Metals
All used Citroen Inlet Manifold Metals listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Citroen from premium breaker yards from across the UK.
About Inlet Manifold Metals
The engine needs oxygen from the air in order for combustion to work. It is imperative that the car's engine is supplied with the correct amount of clean, filtered air. Air needs to be as clean as possible before it mixes with the fuel and burns in the cylinders of the engine. The overall result of this ensures the engine is working to its optimum, providing more power and fuel efficiency. A car's air intake system consists of several vital components that work together to ensure the air entering the engine is a steady and uninterrupted flow of clean, filtered air. The Citroen inlet manifold metal ensures the air or fuel/air mixture is provided to the inlet/intake ports in the cylinder heads in the engine. In some cases the inlet manifold also functions to deliver coolant.
The inlet manifold gasket functions to act as a sealant to the Citroen inlet manifold metal, ensuring that a tight seal is maintained between the inlet manifold and the cylinder head. The inlet manifold metal, consists of a selection of pipes or tubes, usually manufactured from aluminized steel, that function to deliver the air equally to each of the cylinder heads in the engine. This vital part works to ensure the air is divided evenly, so an equal quantity of air is flowing into each of the cylinders at the same time, so that precisely the right amount of air can mix with precisely the right amount of fuel in the cylinders in order for combustion to occur.
It is common for an internal combustion engine to use a four-stroke action. The intake stroke, which is the first stroke of the pistons, draws an equal amount of air from the inlet manifold into each cylinder, delivering the air via the air intake valve. For the next three strokes of the engine the air intake valves are shut while compression, combustion and exhaust processes are occurring. Then the intake valves open again and once more the air is drawn through into the cylinders from the inlet manifold. The Citroen intake manifold metal ensures the right amount of air is ready to be drawn into the cylinders when the intake valves open and that the same amount of air is being delivered into each of the engine's cylinders.
Signs of a faulty inlet manifold can include an engine that struggles when idling; a stuttering, shaking engine; an engine that is stalling; and a loss of power when accelerating. To be certain the exact cause of the fault is properly diagnosed it's always a good idea to seek the advice of your mechanic. It is really important when replacing a faulty inlet manifold that you fit a replacement part that's compatible with your vehicle. Specifically manufactured for the make and model of your vehicle, the Citroen inlet manifold metal is the ideal product, providing a part that will fit well, perform properly and last longer.
- Unfortunately, the founder of Citroën went bankrupt in 1934, even though the cars they produced were selling well and incredibly popular. The company exists today because tyre company Michelin bought the majority of shares in the company.
- The 1934 Citroën 7CV was the first mass-produced car to have front-wheel drive, hydraulic brakes, and real suspension! This basic design found its way into subsequent models right up until three decades later in the mid-1950s.
- Buying Maserati was definitely a mistake for Citroën. The SM model didn't sell well, and that led to financial difficulties that meant the car company was eventually acquired by Peugeot.
- John Lennon appeared in an advert for the Citroën DS3, many years after his death. The advert caused quite a lot of public criticism for Yoko Ono, who agreed to the musician's likeness being used.
- After WWII, Michelin owned Citroën and wanted to make a car for the people. The Citroën 2CV was designed for driving on French roads, so it was incredibly sturdy, and tests were carried out by driving through ploughed fields with trays of eggs on the seats. Although changes in design happened, some version of the Citroën 2CV was in production from 1949 all the way through to 1990.