Used Fiat Replacement Wishbone Parts | Used, Second-Hand Wishbone parts For Sale

Used Fiat Replacement Wishbone Parts | Used, Second-Hand Wishbones

All used Fiat Replacement Wishbone Parts | Used, Second-Hand Wishbones listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Fiat from premium breaker yards from across the UK.

About Replacement Wishbone Parts | Used, Second-Hand Wishbones

In a standard wishbone suspension there are two wishbone shaped metal arms (sometimes called A-Arms) per wheel. Each Fiat wishbone is mounted to the chassis at two places using bushes or ball joints and to the knuckle in one place. The coil spring and damper is attached to the rear wishbone of the pair.

Their role is to precisely control the motion of the wheel during travel. Although they are sometimes called A-Arms, they can in fact also be L shaped or H shaped, with L shaped brackets preferred for passenger vehicles as the drive can be more comfortable and have good handling.

The Fiat wishbones are configured slightly differently to front wishbones. Where two Fiat wishbones are used on each wheel, in rear suspension you can have a pair of wishbones on each side of the wheel, meaning a total of four wishbones per wheel.

In the failure of a Fiat wishbone you will notice a very loud rattle, vehicle vibration and lack of control over wheel positioning. Damage is more likely on ball joints where wishbones connect to the vehicle and can be caused by corrosion.

Fiat trivia

• Most Fiats are still manufactured in Italy, but the second-largest producer is Brazil. That's because Fiats are the most popular car make in Brazil, and there are more sales of Fiats there than all of the other manufacturers combined.
• As a car accessory that should be seen much more than it is, the Fiat 500L came with its own coffee maker. The espresso machine would have made those morning commutes far easier.
• Fiat have been leaders in technology innovation. They were the first company to produce a minivan, the Fiat 600 Multipla. They rolled this out in 1956!.
• Fiat's first car ever was the 4HP, which they rolled out in 1899. It came with a two-cylinder engine, had 4.2 horsepower and managed an impressive 22mph. The car was built in Turin, Italy, where Fiat still has its factory.
• The British School of Motoring uses Fiats as learner vehicles. They moved from the Vauxhall Corsa to Fiats in 2009, and Fiat has now supplied over 14,000 vehicles to the BSM.