Used Fiat Scudo Shock Absorber For Sale

Used Fiat Scudo Shock Absorber

All used Fiat Scudo Shock Absorber listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com listed used car parts for Fiat Scudo are from premium breaker yards from across the UK, saving you up to 80% compared to main dealer prices.

About Shock Absorber

Most modern cars have shock absorbers or hydraulic dampers as part of their suspension system. Usually combined with coil springs the shock absorbers primary function is to smooth out the cars ride and dampen any bounce generated by the springs as the car travels over the ground.

The shock absorber is constructed of hollow metal tubing which is sealed with end caps creating a chamber or cylinder which is filled with hydraulic oil or fluid. A piston located inside the chamber is connected to a rod which passes through seals at one end. The piston is able to move up and down the chamber but due to narrow passages in the piston the oil slows or dampens its movement.

The chamber end of the shock absorber (bottom) is bolted to the axle, trailing arm or strut while the piston rod end (top) is bolted to a reinforced section of the bodywork. This braces the suspension of the car slowing any bounce due to the resistance provided by the shock absorber.

There are several different types of shock absorber but the most common are either telescopic or strut. Telescopic shock absorbers are used with most suspension systems including trailing arm, wishbone, leading arm and swing axles. Strut shock absorbers or inserts are similar in design although are an integral part of the coil spring. The most common system of this type is the MacPherson strut which can be used on both front and rear wheels.

Shock absorbers generally have a fixed life expectancy although this can vary significantly depending on driving style, distance covered and terrain. They are generally non serviceable although should be checked regularly for early signs of wear or failure. The common point of failure is the seal where the piston rod exits the chamber. As the seals wear they are likely to allow oil to leak which will eventually reduce their efficiency resulting in poor ride and road holding. Other checks should include signs of damage from road debris including significant dents to the chamber; corrosion, pitting or scoring of the piston rods which will cause premature seal wear or damage to the mounting bolts, brackets or bushes.

When replacing shock absorbers it is generally recommended to so in axle pairs to ensure balanced suspension performance across the width of the vehicle.

Fiat trivia

  • Fiat's first car ever was the 4HP, which they rolled out in 1899. It came with a two-cylinder engine, had 4.2 horsepower and managed an impressive 22mph. The car was built in Turin, Italy, where Fiat still has its factory.
  • The British School of Motoring uses Fiats as learner vehicles. They moved from the Vauxhall Corsa to Fiats in 2009, and Fiat has now supplied over 14,000 vehicles to the BSM.
  • There was an ongoing joke in the UK that Fiat was an acronym for 'Fix it again, Tony'. Fiat found it hilarious and used the slogan themselves in 2014 in their ads.
  • Most Fiats are still manufactured in Italy, but the second-largest producer is Brazil. That's because Fiats are the most popular car make in Brazil, and there are more sales of Fiats there than all of the other manufacturers combined.
  • The 1999 Fiat Multipla has been consistently voted one of the strangest car designs of all time. It’s easy to see why, with the odd light placement, a muffin-shaped top, and two rows of three seats (in the front!). A redesign in 2004 made the Multipla much more popular.