Find parts for your car
Models
Parts
- CV Gaiter Inner (66) Apply CV Gaiter Inner filter
- CV Gaiter Outer (66) Apply CV Gaiter Outer filter
- Doseur Valves (66) Apply Doseur Valves filter
- Link Arm (66) Apply Link Arm filter
- Rear Beam (66) Apply Rear Beam filter
- Rear Stabilizer Bar (66) Apply Rear Stabilizer Bar filter
- Rear Tie Bar (66) Apply Rear Tie Bar filter
- Replacement Wishbone Parts | Used, Second-Hand Wishbone (66) Apply Replacement Wishbone Parts | Used, Second-Hand Wishbone filter
- Steering Box (66) Apply Steering Box filter
- Steering Idler (66) Apply Steering Idler filter
- Steering Lock & Key (66) Apply Steering Lock & Key filter
- Steering Pulley (66) Apply Steering Pulley filter
- Suspension Leg Strut (66) Apply Suspension Leg Strut filter
- Suspension Spheres (66) Apply Suspension Spheres filter
- Suspension Strut (66) Apply Suspension Strut filter
- Torsion Bar (66) Apply Torsion Bar filter
- Track Rod End (66) Apply Track Rod End filter
- Wishbone - Upper Arm (66) Apply Wishbone - Upper Arm filter
Used Land Rover Steering Boxs
All used Land Rover Steering Boxs listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Land Rover from premium breaker yards from across the UK.
About Steering Boxs
In order to translate the rotation of a motor vehicle’s steering wheel to the turning of its wheels requires some form of steering system. All motor vehicles have one of two types of steering system; either a rack and pinion system or a Land Roversteering box. The Land Roversteering box system works by translating the rotation of the steering wheel as the driver turns it into the left and right movement of the pitman arm, which connects to the front wheels via a track rod or centre link, idler arm (which resembles a pitman arm and is situated on the opposite side of the car) and tie rods. Most steering box linkages consist of ball bearings that circulate in a path. As a consequence, this type of Land Roversteering box system is known as the “re-circulating ball.”
In comparison to the rack and pinion system the Land Roversteering box has a greater degree of free play, which means that there is a greater tendency for the parts to wear.
If a Land Roversteering box is badly worn it will result in steering problems, which might include steering wheel shudder, tram-lining and play in the steering wheel. Because of the potential consequences of steering failure, a worn Land Roversteering box needs to be replaced at the earliest opportunity.
Land Rover trivia
- Inspired by the Jeeps that had been used in WWII, the first Land Rover's steering wheel was in the middle of the dashboard. This was partly to counter the need to create left and right-hand drive models for different countries.
- In the 1950s, you could buy yourself a Land Rover with tank tracks instead of wheels. Known as the Cuthbertson Version, it was intended for use by farmers and was tested by driving across the Scottish Highlands.
- Although the first Land Rover was designed in 1947 (by Maurice Wilks), the company wasn't actually founded until 1978!
- Land Rovers and James Bond go hand in hand. The 4x4 Land Rover has been in more Bond films than there have been Bond actors! In Spectre, the Defender SVX was customised with 37-inch tyres and more power.
- The Range Rover designer hated what he had made. Charles Spencer "Spen" King CBE, was focused solely on designing a large V8 engine, and then just drew a box around it to show where the engine would sit. It annoyed him for the rest of his life, and he insisted that he'd only put 0.1% of development time on the car shape. He also hated that they would be used for anything other than farming, saying, "...to use them in the school run, or even in towns and cities at all, is completely stupid."