Find parts for your car
Used Mazda 6 Starter Motor
All used Mazda 6 Starter Motor listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com listed used car parts for Mazda 6 are from premium breaker yards from across the UK, saving you up to 80% compared to main dealer prices.
About Starter Motor
A car engine needs to be rotating at a significant speed in order for it to start. The 6 Mazda starter motor is a powerful electric motor which provides the power to turn the engine. The 6 Mazda starter motor works to provide enough power to get the car engine turning at the correct speed for it to start.
The starter motor is usually situated near the back of the engine, on the underside, where it can be bolted into position on the outer edge of the flywheel. The flywheel is a large cog, approximately 12" in diameter, which is connected to one end of the crankshaft, the main shaft inside the engine, which is turned by the movement of the pistons.
This powerful, electric motor is driven by the car's battery, and starts working when you turn the key in the ignition. It has a thick shaft with a small stubby sprung-loaded cog. When the ignition key is fully turned or starter button pressed, the power is transmitted via a solenoid switch to the motor. When the starter motor rotates, the sprung-loaded cog, due to its design, spirals out against its shaft spring and engages the cog of the flywheel. The starter motor then turns the flywheel, which rotates the engine via the crankshaft and the firing sequence is initiated and the engine starts. When the ignition key or button is released, the sprung-loaded cog on the starter motor disengages from the flywheel and pops back clear.
It is not uncommon for starter motors to malfunction. General wear and tear takes it toll on the 6 Mazda starter motor and it will eventually need replacing. Symptoms of a faulty starter motor can include an engine which is really slow to turn over and no response at all or just a click or clunk from the starter motor when you turn the key in the ignition. It is advisable to have any problems looked at by a professional. When replacing the 6 Mazda starter motor it should be compatible with the make and model of your car.
Mazda 6 trivia
- Oddly, the Mazda 6 is the sixth-generation version of the Mazda 626. Both use the same design platform! It all gets very confusing when you’re trying to keep track of which car is which upgrade!
- Europeans could get their hands on a luxury sports version of the Mazda 6 until production stopped in 2007. After that, catalogues only listed the standard Sport version. The luxury version had a completely different interior and several external differences too.
- The Mazda 6 is made in a variety of different countries. The bulk of the car is made in Japan, but a Mazda 6 might also be made in Michigan, China, or Thailand.
- The Mazda 6 sold faster than any other model of Mazda. It was designed to replace the Capella/626 and was launched in 2002 to critical acclaim and high sales figures.
- The engine in a Mazda 6 is an evolution of the Porsche-designed Duratec V6, which was sold to Ford. The Mazda 6 has this engine because there was a point where Ford owned a third of the Mazda company. Of course, they sold their shares and now it is a wholly Japanese owned car manufacturer (but it still has that Porsche-designed engine).