Find best value great quality parts at cheap prices for your car, van and 4X4s HERE!

Not sure of reg or non-UK reg? Enter make and model here

Not sure of reg? Enter Make and Model manually

Find any Van or Car Part for free, Saving time and Money £££

Find parts now

1Enter your Registration

2Select what parts you want

3Buy parts now or get free personalised quotes

Check our right part guarantee and see how your money is secure when purchasing on Breakeryard.com

Used Mazda Inlet Manifold Gaskets

All used Mazda Inlet Manifold Gaskets listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Mazda from premium breaker yards from across the UK.

About Inlet Manifold Gaskets

The engine needs oxygen from the air in order for combustion to work. It is imperative that the car's engine is supplied with the correct amount of clean, filtered air. Air needs to be as clean as possible before it mixes with the fuel and burns in the cylinders of the engine. The overall result of this ensures the engine is working to its optimum, providing more power and fuel efficiency.  A car's air intake system consists of several vital components that work together to ensure the air entering the engine is a steady and uninterrupted flow of clean, filtered air.  The inlet manifold ensures the air or fuel/air mixture is provided to the inlet/intake ports in the cylinder heads in the engine.  In some cases the inlet manifold functions to deliver coolant. The Mazda inlet manifold gasket functions to act as a sealant to the inlet manifold, ensuring a tight seal is maintained between the inlet manifold and the cylinder head.

Situated in the engine, sandwiched between the cylinder head and the inlet manifold/intake pipe, acting as a sealant, is the inlet manifold gasket. Inlet manifold gaskets will have either an aluminized steel, or plastic carrier/base or core, generally the shape of ring. Sealing beads are usually used to firmly secure the seal around the port. Often made of a specialised rubber or an asbestos mix, the sealing beads in the inlet manifold gasket need to be resistant to coolant, fuel, alcohol and oil. For this reason they're sometimes manufactured from fluoroelastomer (FKM) rubber, or a material called aramid fibre, which is good at resisting oils, solvents and other chemical damage. The inlet manifold gasket is manufactured to be vehicle specific, so materials will vary depending on the car make and model. Buying the Mazda inlet manifold gasket will ensure a part that is compatible with the car you drive. 

The inlet manifold gasket can become worn and corrode over time. If the seal is ineffective, the inlet manifold can develop a leak. If the inlet manifold also carries the coolant around the engine, then you may notice a loss of coolant. If there's a problem with the inlet manifold gasket, the Check Engine warning light should illuminate on the dashboard. A faulty inlet manifold gasket can lead to reduced engine performance, higher emissions and reduced fuel economy.

Signs of a faulty inlet manifold gasket can include an engine that struggles when idling; a stuttering, shaking engine; an engine that is stalling; and a loss of power when accelerating. To be certain the exact cause of the fault is properly diagnosed it's always a good idea to seek the advice of your mechanic. It is really important when replacing a faulty inlet manifold gasket that you fit a replacement part that is compatible with your vehicle. Specifically manufactured for the make and model of your vehicle, the Mazda inlet manifold gasket is the ideal product, providing a part that will fit well, perform properly and last longer.

Mazda trivia

  • The Mazda MX-5 Miata is in the Guinness Book of Records for being the best-selling 2-seat sports car of all time. It was designed by former car journalist Bob Hall.
  • Mazda is the only Japanese car manufacturer not to be based in Tokyo. Instead, they work out of Hiroshima and were there when a nuclear bomb was dropped. The Mazda factories actually survived the atomic bomb thanks to a small mountain being in the way.
  • Mazda has always been big fans of the rotary engine, and although they originally started using them to help distinguish themselves from other car manufacturers, they are still the only car manufacturer to mass-produce rotary engine-powered vehicles.
  • The Mazda logo is meant to be an owl, expressing Mazda's goal of expanding its wings for the future.
  • Mazda entered the US market in 1987 with its first production facility just outside of Detroit. Car company Ford then joined with Mazda at the facility, and the two car brands have been in a collaborative relationship ever since.