Buy Used Rover Seat Belts and Other Car Parts

Used Rover Seat Belts

All used Rover Seat Belts listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list used car parts for Rover are from premium breaker yards from across the UK, saving you up to 80% compared to main dealer prices.

About Seat Belts

The Rover seatbelt is a vital safety device in a car, acting as the Primary Restraint System, helping to restrain and hold the person seated in the car secure in the seat in a crash situation, or when brakes are applied suddenly at high speed. 

The Rover seatbelt is a strong, retractable belt which is pulled across the driver and secured by clicking into a bracket fitted to the side of the seat.  There are many different types of seatbelt, the two-point, the lap, the sash, the multi-point child’s seatbelt, but the most common found in modern vehicles is the three-point seatbelt which consists of a strip of material or belt, anchored on three points around the seating position, that is placed over the chest and upper body and lap of the occupant.

The Rover seatbelt works by stopping the body from flying out of the seat, minimising the risk of hitting the interior of the car, such as the windscreen. Seatbelts can limit the danger of serious injury or even death by stopping the driver or occupants of the vehicle being thrown out via windows, windscreens or doors in the event of a collision. They will also aid in safe deployment of the airbag as they will keep the occupant in the correct position should this be activated. Wearing a seatbelt, and ensuring it's worn correctly, can mean the difference between survival and serious injury or death in an accident.

It's law to have seatbelts fitted for every seat in the car and for these seatbelts to be correctly worn at all times while the car is moving. It's important that the seatbelts in your car are in good working order so that they can function properly when needed. The majority of faults regarding seatbelts are due to problems with the retractor system, either being stuck and not allowing the belt to unreel or not allowing it to be reeled back into its holder. The belts themselves may begin to tear or rip due to prolonged chafing and over-long usage. The seatbelt buckle may malfunction and not enable the tongue to insert correctly and be locked in place. When you need to replace the rear seatbelt on the driver's side, purchasing a Rover seatbelt will ensure it's compatible with the make and model of your car. 

Rover trivia

  • During the 1960s, Rover was forced to cancel several promising car projects. That's because Rover became a corporate partner with Jaguar, and some of the projects they were working on were too similar! The Rover P8 was just one of the victims of this partnership and a prototype was never built.
  • In 2003, MG Rover released the CityRover. It didn't sell anywhere close to expectations, and the car company started to seriously struggle as a result.
  • The Rover P8 has some really obvious inspirations. The front bumper is clearly a Pontiac and the side profile is eerily similar to the Opel Rekord. The plan was to keep the P8 shorter than their previous Rover 2000, but it ended up being longer.
  • British Aerospace ended up buying the Rover brand in 1988. But they sold it off in 1994 to BMW, who formed MG Rover.
  • The Rover name has had a turbulent history, but they achieved some amazing things. In March 1950, they unveiled the prototype of the Rover JET1. It was the first car to ever run off a gas turbine engine. It could reach a speed of 88mph! However, it did manage 150mph during speed tests. The JET1 is now on display at the London Science Museum.