Find parts for your car
Models
- 100 (2) Apply 100 filter
- 2000 (2) Apply 2000 filter
- 400 (6) Apply 400 filter
- 45 (7) Apply 45 filter
- 600 (2) Apply 600 filter
- 75 (9) Apply 75 filter
- Metro (2) Apply Metro filter
- MG (11) Apply MG filter
- MG ZS (2) Apply MG ZS filter
- MG ZT (9) Apply MG ZT filter
- RANGE ROVER (22) Apply RANGE ROVER filter
- Range Rover (9) Apply Range Rover filter
- Range Rover Evoque (3) Apply Range Rover Evoque filter
- Range Rover Sport (4) Apply Range Rover Sport filter
- ZS (2) Apply ZS filter
- ZT (9) Apply ZT filter
Used Rover Top Ball Joints
All used Rover Top Ball Joints listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for Rover from premium breaker yards from across the UK.
About Top Ball Joints
The Rover top ball joint acts as a pivot between the wheels and the suspension and connects the upper control arm and the knuckle together with an upper control arm seal boot in the middle. Although there are front ball joints in vehicles, some high-performance vehicles also have rear ball joints.
The Rover top ball joint consists of a ball stud and bearing which sits inside a housing socket. Underneath the bottom side of the bearing is a rubber pressure ring. Lastly there is a grease fitting which acts as a guide for wear.
To inspect for damage of the Rover top ball joint you need to ensure that the vehicle is supported by the wheels. Ensure that the grease fitting is free of dirt and debris and then move a screwdriver or your fingernail across the cover. If the grease fitting is either flush or recessed into the cover the Rover top ball joint needs replacing.
Signs of failure include clicking, popping or snapping sounds when the wheel is turned. Failures of a ball joint are very serious and can cause the wheel’s angle to be incorrect.
Rover trivia
- In 1952, noted car journalist, Bob Dearborn, famously wrote in his Road & Track review that, "… I honestly believe (barring the Rolls-Royce) that there is no finer car built in the world today."
- The iconic logo of Rover is a Viking longship. Currently, the rights to using that logo are in the hands of the Jaguar Land Rover group.
- Honda and British Leyland decided to use the Rover name when they worked together on the range of planned cars to be released in the ‘80s. As a result, the Rover 200 replaced the Triumph Acclaim.
- Rover worked with the BRM F1 team to make the aptly named Rover-BRM. It took a lap of honour in the 24 hours of Le Mans in 1963 as the first gas-driven prototype sports car.
- The Rover P8 has some really obvious inspirations. The front bumper is clearly a Pontiac and the side profile is eerily similar to the Opel Rekord. The plan was to keep the P8 shorter than their previous Rover 2000, but it ended up being longer.