Subaru Justy Common Problems and Solutions
Front shock absorbers failing
Problem:
The front shock absorbers are known for failing. If you can hear a clonking noise coming from the front suspension, as you drive over speed bumps and/or you can see oil leaking from the suspension as you look under the front wheel arch, you need to replace the shock absorbers.
Solution:
As mentioned above, you will need to replace the shock absorbers.
Difficulty level
Shock Absorber
Rear wheel bearing failure
Problem:
Do you hear a droning/rumbling noise from the rear wheels? This will be most noticeable at speeds above 30 mph and when turning round corners. This is a clear indication of failed rear wheel bearings.
Solution:
You will need to replace the rear wheel bearings, in order to resolve the issue. Watch the video below for an idea on how to replace one:
Difficulty level
Wheel Bearing
Driveshaft failure
Problem:
If you can hear a clonking noise coming from your Justy when you pull away, this is most likely caused by a faulty drive shaft. Another way to check that it is faulty, is to turn the steering wheel full lock and listen for a clicking noise as you pull away.
Solution:
If you have any of these symptoms, then you will need to replace the drive shaft. We want to help you to find a replacement drive shaft, at a very low price.
Difficulty level
Drive shaft
Gearbox leaking
Problem:
Have you noticed an oil patch underneath the car? Does it appear to be coming from the gearbox? If yes to both of the above questions, the oil leak is most likely coming from the front gearbox oil seal.
Solution:
You will need to replace the front gearbox oil seal, in order to stop the leak. You may also need to check the level of the gearbox oil and top up it up to the correct level.
Difficulty level
Engine tapping noise
Problem:
Can you hear a tapping noise coming from the top of your engine? You will hear this better if you open the bonnet. This tapping noise is due to a problem with the tappets.
Solution:
You will either need to have the tappets re-set, or you may need to fit replacement ones, in order to fix the problem.
Difficulty level
