Find parts for your car
Models
Parts
- CV Gaiter Inner (2) Apply CV Gaiter Inner filter
- CV Gaiter Outer (2) Apply CV Gaiter Outer filter
- Doseur Valves (2) Apply Doseur Valves filter
- Link Arm (2) Apply Link Arm filter
- Rear Beam (2) Apply Rear Beam filter
- Rear Stabilizer Bar (2) Apply Rear Stabilizer Bar filter
- Rear Tie Bar (2) Apply Rear Tie Bar filter
- Replacement Wishbone Parts | Used, Second-Hand Wishbone (2) Apply Replacement Wishbone Parts | Used, Second-Hand Wishbone filter
- Steering Box (2) Apply Steering Box filter
- Steering Idler (2) Apply Steering Idler filter
- Steering Lock & Key (2) Apply Steering Lock & Key filter
- Steering Pulley (2) Apply Steering Pulley filter
- Suspension Leg Strut (2) Apply Suspension Leg Strut filter
- Suspension Spheres (2) Apply Suspension Spheres filter
- Suspension Strut (2) Apply Suspension Strut filter
- Torsion Bar (2) Apply Torsion Bar filter
- Track Rod End (2) Apply Track Rod End filter
- Wishbone - Upper Arm (2) Apply Wishbone - Upper Arm filter
Used MERCEDES BENZ Replacement Wishbone Parts | Used, Second-Hand Wishbones
All used MERCEDES BENZ Replacement Wishbone Parts | Used, Second-Hand Wishbones listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices and used OEM car parts up to 80% cheaper than main dealer prices for MERCEDES BENZ from premium breaker yards from across the UK.
About Replacement Wishbone Parts | Used, Second-Hand Wishbones
In a standard wishbone suspension there are two wishbone shaped metal arms (sometimes called A-Arms) per wheel. Each MERCEDES BENZ wishbone is mounted to the chassis at two places using bushes or ball joints and to the knuckle in one place. The coil spring and damper is attached to the rear wishbone of the pair.
Their role is to precisely control the motion of the wheel during travel. Although they are sometimes called A-Arms, they can in fact also be L shaped or H shaped, with L shaped brackets preferred for passenger vehicles as the drive can be more comfortable and have good handling.
The MERCEDES BENZ wishbones are configured slightly differently to front wishbones. Where two MERCEDES BENZ wishbones are used on each wheel, in rear suspension you can have a pair of wishbones on each side of the wheel, meaning a total of four wishbones per wheel.
In the failure of a MERCEDES BENZ wishbone you will notice a very loud rattle, vehicle vibration and lack of control over wheel positioning. Damage is more likely on ball joints where wishbones connect to the vehicle and can be caused by corrosion.