Find parts for your car
Makes
- (-) Remove Honda filter Honda
- (-) Remove MG filter MG
- Alfa Romeo (1) Apply Alfa Romeo filter
- Cadillac (1) Apply Cadillac filter
- Citroen (1) Apply Citroen filter
- Fiat (1) Apply Fiat filter
- Jaguar (1) Apply Jaguar filter
- Lancia (1) Apply Lancia filter
- Land Rover (1) Apply Land Rover filter
- Mazda (1) Apply Mazda filter
- Mercedes-Benz (1) Apply Mercedes-Benz filter
- MINI (1) Apply MINI filter
- Nissan (1) Apply Nissan filter
- Opel (1) Apply Opel filter
- Peugeot (1) Apply Peugeot filter
- Rover (121) Apply Rover filter
- SEAT (1) Apply SEAT filter
- Skoda (1) Apply Skoda filter
- Talbot (1) Apply Talbot filter
- UNKNOWN (2) Apply UNKNOWN filter
Parts
- (-) Remove Side Step filter Side Step
- A Post (5) Apply A Post filter
- B Post (5) Apply B Post filter
- Body Shell (5) Apply Body Shell filter
- Cowl Top Panel (5) Apply Cowl Top Panel filter
- Cowl Top Ventilator Louvre (5) Apply Cowl Top Ventilator Louvre filter
- Cross Member (5) Apply Cross Member filter
- Door (23) Apply Door filter
- Door Handle (19) Apply Door Handle filter
- Door Handle - Exterior (19) Apply Door Handle - Exterior filter
- Door Handle - Interior (19) Apply Door Handle - Interior filter
- Hood & Frame (5) Apply Hood & Frame filter
- Landing Slam Body (5) Apply Landing Slam Body filter
- Mesh Bulk Head (5) Apply Mesh Bulk Head filter
- Panel Front (5) Apply Panel Front filter
- Rear Van Door Handle (19) Apply Rear Van Door Handle filter
- Side Skirts (7) Apply Side Skirts filter
- Sliding Door Handle Exterior (19) Apply Sliding Door Handle Exterior filter
- Trim (9) Apply Trim filter
- Valance (7) Apply Valance filter
- Wing (51) Apply Wing filter
We are sorry there are no matched parts listed. However, you can check stock from our breakers nationwide by directly requesting a part.
Request a partUsed Rover 45 Bodywork
All used Rover 45 Bodywork listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices or used OEM car parts up to 80% cheaper than main dealer prices for Rover 45 from premium breaker yards from across the UK.
About Bodywork
What is bodywork/what does it do?
A vehicle’s bodywork is the outer shell of a vehicle and encases all of the essential workings of the vehicle such as the engine and chassis. There are over 130 parts that comprise the car's bodywork.
Getting into the details of bodywork
The bodywork is made from a variety of materials such as plastic, metal and fibreglass. Aluminium is a common metal to be used in a vehicle’s bodywork and has many benefits. It doesn’t corrode easily, meaning it may potentially last longer than steel alternatives. It also has the benefit of being lighter than steel which improves fuel consumption. Steel however, can be favoured by manufacturers as it’s a cheaper metal.
Fibreglass bodywork is becoming less popular, as it’s more difficult to repair if it becomes damaged but does still exist in older vehicles.
Plastic is usually used on areas of the bodywork such as bumpers and sills, but this is still usually only on cheaper cars. An exception to this could be for, example, the Citroen Cactus. The Cactus uses plastic side panels on the doors to create a unique look. This gives it the added bonus of also being a lighter vehicle than most vehicles of a similar size.
What if something goes wrong with the bodywork?
Damage to a vehicle’s bodywork can happen for a variety of reasons, the most common of which has to be rust and corrosion, and is particularly true of the steel parts of the car. Rust and corrosion is likely in the wheel arches and below the doors of a vehicle as these are near to the ground and are likely to be hit with dirt and debris whilst driving.
If you have a small amount of rust on a vehicle you may be able to repair this yourself by removing the rust with a sanding tool and filling and holes with body filler. After this you can prime and paint. If the job is too large, or you do not feel confident with doing this yourself you can take your vehicle to a dedicated body repair shop to repair the damage. They may be able to fix the bodywork by sanding and respraying, or worst case scenario by replacing the rusty panel. If a vehicle has rust that is sharp, this is classed as an MOT failure so should be repaired as soon as possible.
A vehicle’s bodywork may become damaged through a collision with another vehicle. This can result in anything from minor dents to extensive damage to a vehicle’s body panels. There are home use dent kits to take out minor dents from a vehicle’s bodywork, but these have mixed reviews. If a vehicle has severe dents, or a small dent on a raised detail line it’s best to take the vehicle to a body repair shop where a panel beater can correct the issue. Often, damaged body panels need a respray, which can be done at the same place.
Another part of a car body that may become damaged by a collision is the front or rear bumper. These are often made of plastic, and as such as more prone to breaking with heavy force. Others may be made from fibreglass. If a vehicle’s bumper is damaged, and the edges are sharp this is classed as an MOT failure as it can be dangerous for pedestrians. You can also be stopped by a police officer if your bumper has sharp edges, which can result in a fine and three points on your licence. As a temporary repair for a bumper, you can put gaffer tape on it in order to drive it to the mechanics.
Rover trivia
- Corporate shenanigans changed the company a lot by the 70s, and Rover was owned by British Leyland.
- Although there were a few Rover-made cars released in the ‘80s, none of them had the word Rover on any of the badging. Instead, they were called Austins, but they did have a similar, Viking-inspired badge.
- During the 1960s, Rover was forced to cancel several promising car projects. That's because Rover became a corporate partner with Jaguar, and some of the projects they were working on were too similar! The Rover P8 was just one of the victims of this partnership and a prototype was never built.
- The MG Rover Group was the last mass-production car company in the UK to be owned by domestic owners.
- The Rover name has had a turbulent history, but they achieved some amazing things. In March 1950, they unveiled the prototype of the Rover JET1. It was the first car to ever run off a gas turbine engine. It could reach a speed of 88mph! However, it did manage 150mph during speed tests. The JET1 is now on display at the London Science Museum.