Find parts for your car
Used Land Rover Range Rover Velar Shock Absorber
All used Land Rover Range Rover Velar Shock Absorber listed on Breakeryard.com are tested, original (OEM) manufacturer parts and come with a 14 day money back guarantee. Breakeryard.com list cheap new OES or aftermarket car parts at discounted prices or used OEM car parts up to 80% cheaper than main dealer prices for Land Rover Range Rover Velar from premium breaker yards from across the UK.
About Shock Absorber
Most modern cars have shock absorbers or hydraulic dampers as part of their suspension system. Usually combined with coil springs the shock absorbers primary function is to smooth out the cars ride and dampen any bounce generated by the springs as the car travels over the ground.
The shock absorber is constructed of hollow metal tubing which is sealed with end caps creating a chamber or cylinder which is filled with hydraulic oil or fluid. A piston located inside the chamber is connected to a rod which passes through seals at one end. The piston is able to move up and down the chamber but due to narrow passages in the piston the oil slows or dampens its movement.
The chamber end of the shock absorber (bottom) is bolted to the axle, trailing arm or strut while the piston rod end (top) is bolted to a reinforced section of the bodywork. This braces the suspension of the car slowing any bounce due to the resistance provided by the shock absorber.
There are several different types of shock absorber but the most common are either telescopic or strut. Telescopic shock absorbers are used with most suspension systems including trailing arm, wishbone, leading arm and swing axles. Strut shock absorbers or inserts are similar in design although are an integral part of the coil spring. The most common system of this type is the MacPherson strut which can be used on both front and rear wheels.
Shock absorbers generally have a fixed life expectancy although this can vary significantly depending on driving style, distance covered and terrain. They are generally non serviceable although should be checked regularly for early signs of wear or failure. The common point of failure is the seal where the piston rod exits the chamber. As the seals wear they are likely to allow oil to leak which will eventually reduce their efficiency resulting in poor ride and road holding. Other checks should include signs of damage from road debris including significant dents to the chamber; corrosion, pitting or scoring of the piston rods which will cause premature seal wear or damage to the mounting bolts, brackets or bushes.
When replacing shock absorbers it is generally recommended to so in axle pairs to ensure balanced suspension performance across the width of the vehicle.
Land Rover trivia
- One of the most unique vehicles ever was the floating SUV designed and built by Land Rover. Unfortunately, the Floating Ninety Defender led many drivers to believe that their own Land Rovers could also float, and many cars were driven into lakes as a result.
- In 2012, Land Rover hired Posh Spice as their temporary creative director. Victoria Beckham was the key to the design of the Evoque Special edition. It came with a hand-finished matte paint job, mohair floor mats, and a matching four-piece luggage set.
- The Queen loves Land Rovers and is reported to have owned as many as 30 different models in her life. It was in a Land Rover Defender that her majesty terrified the then Crown Prince Abdullah with her wild driving skills.
- Land Rovers and James Bond go hand in hand. The 4x4 Land Rover has been in more Bond films than there have been Bond actors! In Spectre, the Defender SVX was customised with 37-inch tyres and more power.
- According to the film, Judge Dredd (1995), Land Rover will be the last ever car manufacturer in the world. The car company had a heavy presence in the film, and you can still see some film versions of the car driving around the UK.